Roofing

7 Contract Lines That Protect a Triad Roof Replacement

0

A roof estimate that reads “replace roof, 28 squares, architectural shingles” is a price, not a plan. Two bids with the same bottom line can describe very different jobs, because lifespan depends on details that rarely appear in a one line quote: how the deck is nailed, what goes under the shingles and what happens to the old flashing.

Replacement is also the moment to settle questions that are expensive to fix later. Seven lines in a signed contract do most of the protecting for homeowners across Forsyth and Guilford counties. They cover who is accountable, what comes off, what goes on, how it is attached and how money changes hands, and each can be checked before a crew arrives.

Mid Atlantic Roofing Systems, a Winston-Salem Roofing Company with an office on Reynolda Road since 2016, uses dedicated W-2 crews instead of subcontractors, holds Owens Corning Platinum Preferred status, sends HAAG certified inspectors to the roof and backs its work with a three year workmanship warranty. Call (336) 671-5208 and ask for the written, line by line estimate, then hold it up against the seven lines below.

1. Proof of license and insurance

What to write: The legal business name, a license number if one applies, and current liability and workers’ compensation certificates sent straight from the insurer.

Why it matters: State law requires a general contractor license from the NC Licensing Board for General Contractors only when a project costs $40,000 or more, and many single family reroofs come in under that line. Where no license is required, the insurance certificate becomes the main proof that a fall from your roof is not your liability.

Watch for: A certificate the contractor photographed rather than one the insurer issued.

2. A full tear-off and a decking price

What to write: Removal of old roofing down to the deck, disposal included, and a price per sheet for replacing damaged plywood or OSB.

Why it matters: Rotted decking only shows after the shingles come off. A set unit price turns a surprise into a known cost, and a tear-off clause blocks a quiet overlay of new shingles on old ones. Ask who cleans the yard afterward, including a magnetic sweep for nails.

Watch for: “Decking as needed” with no price attached.

3. Materials by manufacturer and line

What to write: Shingle brand and product line, underlayment, drip edge, starter strips, ridge cap and the intake and exhaust parts that ventilate the attic.

Why it matters: “Architectural shingles” covers products with very different warranties and wind ratings. Naming the line lets you compare bids fairly and check what arrives on the pallet. Ask whether the underlayment is synthetic or felt, since the two behave differently if a storm hits before the shingles go on. Ventilation matters too, because trapped attic heat and humidity wear a new roof from below.

Watch for: Generic terms that let a crew substitute.

4. Deck fastening and sealing

What to write: Nail type, length and spacing, and whether the deck seams will be sealed.

Why it matters: The IBHS FORTIFIED re-roofing checklist specifies 8d ring shank nails and a sealed roof deck, with nail spacing as tight as 4 inches in its hurricane and hail version. The Triad is inland, and North Carolina’s FORTIFIED incentives have focused on the coast, so ask your insurer whether any credit applies. Even without one, tighter fastening is a modest hedge against the thunderstorm winds of a Piedmont summer.

Watch for: “Nailed per code” with no numbers.

5. Flashing and penetrations

What to write: New step flashing, pipe boots and chimney counterflashing, plus fresh flashing around any skylight or sun tunnel.

Why it matters: Leaks tend to start at roof penetrations and wall intersections, not in open shingles. Reusing old flashing puts years of wear under a new roof, and replacing it adds little to the bill compared with a second repair visit. Sun tunnels and skylights deserve their own line, because their curbs and flanges are where a rushed install shows up first.

Watch for: Caulk offered as the fix for worn flashing.

6. Insurance claim terms

What to write: That work begins after your claim is settled, that you remain free to hire other contractors, and that you pay your policy deductible.

Why it matters: The North Carolina Department of Justice warns that storm chasing roofers push exclusive contracts that lock out competing bids and often skip over the deductible. It adds that an adjuster’s approval does not prove that a replacement is needed and that large claims usually raise premiums.

Watch for: Anyone promising a “free roof.”

7. Payment schedule, change orders and warranties

What to write: A modest deposit, a milestone payment, final payment after cleanup and a walkthrough, written pricing for any change order, and separate lines for workmanship and manufacturer warranties with their lengths.

Why it matters: Payment tied to progress keeps a crew accountable through the last day. A workmanship warranty is only as good as the company behind it, so confirm a local address and phone number that will still answer in year four. Ask for a lien waiver at final payment so a supplier’s unpaid bill cannot follow the job to your property.

Watch for: Full payment before the job starts.

Put the seven lines into every bid you collect and compare them side by side. A blank answer is still an answer, and the contractor who fills each line in without fuss is usually the one who has done it before. If only part of the roof is failing, request a repair estimate in the same format, including the same flashing and fastening details, so you can weigh patching against replacement on equal terms.

Comments

Comments are closed.