Home Improvement

Why Is My Heater Breaking?


Heaters, like many other mechanical systems, can fail under certain conditions. When this occurs, it is beneficial to be aware about your device and how to perform some simple maintenance on your own. Continue reading to discover more about your heater and what to do if something goes wrong. When you need heater repair and maintenance in Staten Island, NY, contact PAC Plumbing, Heating, and Air Conditioning.

Look Into the Power Source

If you’ve checked the power source and the problem persists, there could be a problem with the heater. Other internal components, such as the thermostat, relay, or motor, may have been harmed. If the heater is old or has been subjected to heavy use, these components may need to be replaced.

Look for Any Impediments

Check that nothing is blocking the flow of air to or from your heater. If something obstructs the airflow and prevents appropriate heat dispersion, your heater will shut down. Blockages are commonly caused by the presence of furniture, curtains, rugs, and other things near the heater. Examine whether removing the barrier from the heater will enhance airflow. In rare cases, something may have been mistakenly inserted into the vents, causing a blockage. Examine and remove anything that has fallen into or near the air vents.

Cleaning and Replacing Filters

Over time, the grit and dirt in your heater’s air filter may collect. The filter keeps the heater’s inner components clean by eliminating dirt and other airborne contaminants before they enter the system. When this happens, airflow is obstructed, causing your heater to run inefficiently or not at all. To avoid this, make sure your air filter is checked and cleaned on a regular basis. If the filter has to be replaced, follow the manufacturer’s recommendations. This will keep your heater running smoothly and will help it last longer.

Problems With the Thermostat

If your heater isn’t working properly, the thermostat may be set too high or too low. Because the thermostat controls when the heater goes on and off, changing it appropriately is critical to ensuring the heater works properly. Check the user handbook that came with your thermostat to ensure it is properly set. If not, change the settings so that the heater works properly.

Pilot Light Troubleshooting

The heater may only need its pilot light re-lit to run properly again. Depending on the type of heater, the technique for relighting it may differ. To ensure that your pilot light is lit correctly and safely, you must strictly follow the manufacturer’s instructions. If you rigorously follow the directions, your heater should be functioning in no time. If your efforts fail, it is essential to seek the advice of a qualified specialist. They are better at identifying and resolving underlying issues.

Hire a Technician

It is critical to get a professional checkup done after you have completed your own work to ensure the most thorough examination. PAC Plumbing, Heating, and Air Conditioning has been assisting customers with furnace problems since the 1990s, effortlessly discovering the core cause each time.

Consider contacting PAC Plumbing, Heating, and Air Conditioning to have your furnace inspected before winter arrives. They can tune up your machine before it breaks down.

Furnace maintenance can be challenging, so only a certified specialist should undertake repairs. PAC Plumbing, Heating, and Air Conditioning will ensure that your home is secure and pleasant, whether they arrive on a scheduled visit or in the middle of an emergency.

Clients in Staten Island, New York, are certain that they are dealing with a dependable team that is dedicated to their mission. There is never a mess for you to clean up, and your home is always treated with the utmost care.

During Texas’ harsh winters, your furnace could be a lifesaver. When things don’t go as planned, rely on the team at PAC Plumbing, Heating, and Air Conditioning


Comments are closed.