Fire protection is important for any commercial building. Fire suppression systems help protect people and property from dangerous fires. There are multiple different types of fire sprinkler installation bethesda md.
- Wet Pipe Commercial Sprinkler System
This type of sprinkler system has overhead piping that is filled with pressurized water. When a sprinkler activates, the system immediately discharges water to douse the fire. This is the most common installation of fire sprinklers Orange County CA because it is simple and reliable. These systems are also less expensive and have lower installation and maintenance costs, though they may leak or develop problems if the temperature drops below 40F.
- Dry Pipe Commercial Sprinkler System
Dry pipe sprinkler systems are filled with air or nitrogen indirect, non-heated piping. When a sprinkler activates, the system releases water into the pipes and then discharges it to douse the fire. These systems are a good alternative for spaces that are exposed to freezing temperatures. However, they are more expensive to maintain and it can take up to 60 seconds for the water to be discharged after a fire is detected.
- Foam Water Commercial Sprinkler System
Some types of fires should not be doused with water. Foam water fire sprinkler systems can be better choices for areas where these types of fires may occur. These systems mix water with a foam concentrate mix that travels through the pipe to douse a fire. These systems work well for dousing flammable solvent fires, such as alcohol or gas, because the foam suffocates the fumes and prevents re-flash.
The best type of fire suppression system for your building depends on what conditions the system will be exposed to and what type of fires may occur in the area. If you aren’t sure which system is best for your space, a fire safety expert can help.